Cisco Vcs Provisioning - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2
Contents

Cisco VCS provisioning

When using Cisco VCS (Video Communication Server)
provisioning, a template containing all the settings that can be
provisioned must be uploaded to Cisco TMS (TelePresence
Management System). This is called the Cisco TMS
provisioning configuration template.
All the system settings for your video system are included in
this template. All settings except SystemUnit Name
Profile [1..1] URI can be automatically provisioned to the video
system.
The settings are described in the System settings
this guide. Examples showing either the default value or an
example value are included.
D15078.04 MX200 G2 and MX300 G2 Administrator Guide TC7.3, DECEMBER 2014.
Introduction Web interface
Downloading the provisioning configuration template
You can download the templates here:
http://www.cisco.com/c/en/us/support/collaboration-
endpoints/telepresence-mx-series/products-release-notes-
list.html
and SIP
For each software release there is one provisioning
configuration template (XML file) for each video system
model. Take care to use the correct file.
chapter in
Read the Cisco TMS Provisioning Deployment Guide to find
how to upload the file to Cisco TMS, and how to set the
desired values for the parameters to be provisioned. If not set
by Cisco TMS, the default values will be used.
System settings
www.cisco.com — Copyright © 2013–2014 Cisco Systems, Inc. All rights reserved.
119
Administrator Guide
Setting passwords Appendices Appendices