User Roles, User Accounts And Password - Cisco CTS-SX10-K9 Getting Started Manual

Cisco TelePresence SX10 Quick Set Getting Started Guide
SX10 Quick Set Contents Introduction Configuration Configuration Appendices Contact
User roles, user accounts and
password
You need ADMIN rights to configure the system via web
interface.
User roles: A user must possess one or a combination of
several user roles. Three user roles exist, representing
different rights: ADMIN, USER and AUDIT. It is important to note
that these roles have non-overlapping rights.
A complete administrator user account with full access rights,
like the default admin user, must possess all three roles.
You can read more on how to create and manage user
accounts in the administrator guide for your product.
NOTE: Initially, no password is set for the default admin user.
We strongly recommend that you set a password for this user,
and any other users possessing an ADMIN role, to restrict
access to system configuration.
A warning on the screen of your video system indicates if no
administrator password is set. To remove the warning you must
set an administrator password.
Make sure to keep a copy of the password in a safe place.
You have to factory reset the unit if you have forgotten the
password.
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
7