Cisco Vcs Provisioning - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents

Cisco VCS provisioning

When using Cisco VCS (Video Communication Server)
provisioning, a template containing all the settings that can be
provisioned must be uploaded to Cisco TMS (TelePresence
Management System). This is called the Cisco TMS
provisioning configuration template.
All the system settings for your video system are included in
this template. All settings except SystemUnit Name
Profile [1..1] URI can be automatically provisioned to the video
system.
The settings are described in the ► System settings
in this guide. Examples showing either the default value or an
example value are included.
D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface
Downloading the provisioning configuration template
You can download the templates for the Profile series here:
► http://www.cisco.com/c/en/us/support/collaboration-
endpoints/telepresence-profile-series/products-release-
notes-list.html
and SIP
You can download the templates for the C series here:
► http://www.cisco.com/c/en/us/support/collaboration-
endpoints/telepresence-integrator-c-series/products-
release-notes-list.html
chapter
For each software release there is one provisioning
configuration template (XML file) for each video system
model. Take care to use the correct file.
Read the Cisco TMS Provisioning Deployment Guide to find
how to upload the file to Cisco TMS, and how to set the
desired values for the parameters to be provisioned. If not set
by Cisco TMS, the default values will be used.
System settings
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
129
Administrator Guide
Setting passwords Appendices Appendices