Access The Web Interface - Cisco CTS-SX10-K9 Getting Started Manual

Cisco TelePresence SX10 Quick Set
SX10 Quick Set

Access the web interface

The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
We recommend that you use the latest release of one of the
major web browsers.
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.
Contents User interfaces Introduction
1. Connect to the video system
Open a web browser and enter the IP address of
the video system in the address bar.
To find the IPv4 address and/or IPv6
address of the system, navigate to the
upper left corner on the home screen with
the remote control and press OK. Then
navigate to
Configuration
Settings and press OK.
2. Sign in
Enter the user name and password for your
video system and click
20
Appendices
Sign In.
The system is delivered with a default
user named admin with no password
(i.e. leave the Password field blank
when signing in for the first time).
We strongly recommend that you set
a password for the admin user.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contact
Signing out
Hover the mouse
over your user
name and choose
Sign out from the
drop-down list.