The System Configuration - Cisco CTS-SX10-K9 Getting Started Manual

Cisco TelePresence SX10 Quick Set
SX10 Quick Set
The System Configuration page
You can open the System Configuration page from the
Configuration menu, and access all configuration settings.
All settings are not available on all products; therefore the folders
shown to the right may or may not be present on your system.
You can find a complete description of the web interface and the
settings in the administrator guide for your system.
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.
Contents Introduction Configuration
The System configuration menu
The settings are arranged with the following top level categories:
• Audio: Settings for microphones, audio outputs, echo control,
volume, sounds, alerts, and more.
• Cameras: Settings for focus mode, brightness, whitebalance,
backlight compensation, options like flip and mirror, and more.
• Conference: Conference settings like transmit and receive bit
rates, bandwidth allocation, incoming call handling, encryption,
packet loss resilience and far end control.
• FacilityService: Setting up speed dial buttons for facility services,
e.g. Helpdesk.
• Logging: Set logging mode (not applicable in this software
version).
• Network: IP, VLAN and QoS settings.
• NetworkServices:
Telnet, SSH, HTTP, HTTPS, SNMP, SIP and NTP.
• Phonebook Server:
• Provisioning: Settings for provisioning mode, manager address
and protocols and methods.
• RTP Port Range:
• Security: Settings for an audit server and error logging.
• SerialPort: Enable or disable the serial port, and set its baud rate.
• SIP: All settings for the SIP protocol.
• Standby: Configure when the system should enter standby and
how it should behave when entering/leaving standby mode.
• SystemUnit: Settings like system name and type, and menu
language selection.
• Time: Date and time settings.
• User Interface: On-screen display settings.
• Video: Settings for video sources and monitors, and video display
set-up and layout.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
22
Getting Started Guide
Appendices Appendices
Enable/disable the network services: Multiway,
Phonebook type and location.
RTP port numbers.
Contact