Setting The System/Codec Password - Cisco CTS-SX10-K9 Getting Started Manual

Cisco TelePresence SX10 Quick Set
SX10 Quick Set

Setting the system/codec password

You need a user name and a password to sign in to the web
and command line interfaces of your system.
The video conference system is delivered with a default user
account with the user name admin and no password set. This
user has full access rights to the system.
A warning on the screen of your video system indicates if no
administrator password is set. To remove the warning, you
must set an administrator password.
NOTE: We strongly recommend that you set a password for
the admin user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe place.
You have to contact your Cisco representative, if you have
forgotten the password.
Back to task overview
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.
Contents Introduction
1. Open the Change Password dialog
Hover the mouse over your user name, and
choose Change password
2. Set the new password
Enter your current and new passwords as
requested, and click
change to take effect.
If the password currently is not set, leave
the
Configuration Configuration
in the drop-down list.
Change password for the
Current password field blank.
16
Getting Started Guide
Appendices
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
Contact