Cisco Vcs Provisioning - Cisco DX series Getting Started Manual

Cisco TelePresence Video Systems

Introduction

Cisco VCS provisioning

When using the Cisco VCS (Video Communication Server)
provisioning, a template containing all the settings that can be
provisioned must be uploaded to Cisco TMS (TelePresence
Management System). This is called the Cisco TMS provision-
ing configuration template.
All the advanced settings for your video system are included
in this template. All settings except SystemUnit Name
Profile [1..1] URI can be automatically provisioned to the video
system.
The advanced settings are described in the administrator guide
for your video system.
Read the Cisco TMS Provisioning Deployment Guide to find
out how to upload the file to Cisco TMS, and how to set
the desired values for the parameters to be provisioned. If
not set by Cisco TMS, the default values are used. Go to:
 http://www.cisco.com/c/en/us/support/conferencing/
telepresence-management-suite-tms/products-installation-
and-configuration-guides-list.html
D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016.
User interfaces Web interface
Download the provisioning configuration
template
You can download the templates here:
DX Series:DX Series Release Notes
and SIP
MX Series:MX Series Release Notes
SX Series:SX Series Release Notes
For each software release there is one provisioning configu-
ration template for every video system model. Make sure to
download the correct file.
Setup assistant
32
Getting Started Guide
Touch Appendices Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.