Access Setup Assistant - Cisco CTS-SX10-K9 Getting Started Manual

Cisco TelePresence SX10 Quick Set
SX10 Quick Set

Access Setup assistant

Settings, Standby
mode and Do Not
Disturb feature
Place Share
calls content
D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.
Contents Introduction
Camera Control
To gain access to the Settings menu, move cursor to upper
left corner of the screen and press
Then navigate down to Settingsv and press
Configuration
The Settings shows the basic system information. In addition
OK on the remote control. it provides access to the
OK again. system.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
19
Getting Started Guide
Appendices Appendices Contact
Setup assistant and to restart the