Technical Specifications - Planmeca SingLED User Manual

TECHNICAL SPECIFICATIONS

9 TECHNICAL SPECIFICATIONS
Planmeca SingLED
Illumination intensity of 700 mm
Optimum colour temperature
Classification
Colour of the operating light arm
Weight of SingLED light
Connection to supply
Power input
Power control (MENB1030A2402F01) (Optional)
Connection to supply
Supply frequency
Power output
NOTE: When the Planmeca SingLED operating light is connected to other
equipment, the current must be limited to max. 2 A with e.g. a fuse.
Environmental requirements
Operating conditions:
Temperatures:
Relative humidity:
Air pressure:
Altitude:
Storage conditions:
Temperatures:
Relative humidity:
Air pressure:
If the unit has been stored at temperatures below +10 °C (50 °F) for more than few
hours, time must be allowed for the unit to reach the room temperature in its own
package, before connecting the dental unit to mains voltage.
Transportation conditions:
Temperatures:
Relative humidity:
Air pressure:
12 Planmeca SingLED operating light
8000 lx - 35000 lx (factory limitation)
5000-5500K
Class I, type B
RAL 9016
8.1 kg (18.3 lbs)
+15 VDC/0.9 A...+32 VDC/0.4 A
24 VAC/0.6 A50/60 Hz
Separation for main supply 4 kV
Air clearances 5 mm
Creepage distances 8 mm
Power supply must fulfill IEC60601-1 ed.3
(2005)
< 25 W
100 - 240 VAC
50 / 60 Hz
24V/1.33A max
+15°C to +35°C (+59°F to +95°F)
Non-condensing humidity; 5% RH to 95% RH
800 hPa to 1060 hPa (12 psi to 15 psi)
< 2000 m (less than 1.25 miles)
-5°C to +60°C (+23°F to +140°F)
Non-condensing humidity; 5% RH to 95% RH
700 hPa to 1060 hPa (10 psi to 15 psi)
-20°C to +60°C (-4°F to 140°F)
Non-condensing humidity; 5% RH to 95% RH
700 hPa to 1060 hPa (10 psi to 15 psi)
User's Manual