Table of Contents
Advertisement
Using Your Coil Element Cooking
Surface
It is normal for some parts of the cooktop, especially
Coil
Elements
areas surrounding
the surface elements,
to become
The coil elements of your range are self-eleaning.
Do
warm or hot during
surface
cooking
operations,
not immerse the elements in water.
Therefore,
do not touch or let heat-sensitive
materials
such as plastics touch the eooktop until it has had time
To remove:
Raise the element when cool and carefully"
to cool.
pull out and away from tile receptacle.
To replace:
Insert the terminals on the element into
Lift-up
Cooktop
the receptacle and guide the element into place until it
Your range features an upswept cooktop that can be
sits level on the drip bowl.
lifted up for convenient
access to the area under the
cooktop. The top is hinged and can be raised but not
Drip
Bowls
removed.
The drip bowls, located under each surface element, are
designed
to catch hoilovers.
They must always he
used--absence
of these bowls during
cooking may
damage wiring or other parts underneath
the eooktop.
Clean the drip bowls frequently. See cleaning section,
pages 12-i5.
To llft eooktop: When cool, grasp the front edge of the
cooktop and gently lift up until the two automatic prop
rods at the front of the cooktop snap into place.
To lower eooldop:
Hold the front edge of the eooktop
and carefully pnsh back on each prop rod to release the
notched support. Then gently lower the top into place.
The prop rods will slide into the range frame.
PAGE 8
Advertisement
Table of Contents
