Maytag CRE9500C Use & Care Manual page 14

Hide thumbs Also See for CRE9500C:
Table of Contents

Advertisement

4. Wipe up acid spillovers such as lemon juice, tomato
TO Interrupt
or Reset
the
Clean
Cycle
sauce or milk-based
sauces and sugary spillovers.
If the door has not locked, the lock lever can be moved
Porcelain enamel is acid resistant,
not acid proof,
completely to the left to cancel the cycle.
The porcelain
finish may discolor
if acld spills
are not wiped up prior to a self-dean
eyrie.
If the door is locked, push the CANCEL pad. Tile door
will not open until "Lock" turns off in the display. At
5. Do not
use
oven
cleaners
or oven
liner
that time, the door lock lever can be returned
to its
protective
coatings
of any kind on the self-clean
original position and the door can be opened. The oven
oven finish or around
any part of file oven as
will still be hot.
they will damage the oven finish.
6. To prevent damage, do not clean or rub the gasket
After
the Self-Clean
Cycle
on the oven door. The gasket is designed to seal in
heat during the clean cycle.
About one hour after the clean cycle is complete, the
word "Lock" will turn off in the display and the door
7. Turn off the oven light before starting the self-clean
lever can be returned to its original position. The oven
operation. If the oven light is left on during the clean
will still be hot.
cycle, the light bulb will born out.
Some soil may leave a light gray, powdery ash which can
Setting
the Controls
for the Self-Clean
be removed
with a damp cloth.
If soil remains,
it
indicates that the clean cycle was not long enough or a
Cycle
large spillover was not wiped up before the self-clean
1. Close the oven door and move the door lock lever to
cycle. The soil should be removed during the next clean
the right until it rests in the lock position,
cycle.
2. Press the SELF CLEAN pad. The words "Set Clean
If the oven racks were left in tile oven dining the self-
Time" will flash and "3:00" will appear in the display,
clean cycle and do not slide smoothly, wipe the rack
Also,"Clean On" will light as the oven begins to heat.
edges
and rack supports
with a small amount
of
The oven will antomatic_tlly set a clean cycle of three
vegetable oil to restore the ease of nmvement.
hours. A shorter (2 hours) or longer (4 hours) clean
Fine hair-like lines may appear in the oven interior or
cycle can be selected by"pressing tile SELF CLEAN
oven door. This is a normal condition resulting from the
pad and pressing the • or • pad to select 2 to 4
heating and cooling of the porcelain finish. These lines
hours,
do not affect the performance of the oven.
3. Press the CLOCK pad and the current time of day
will reappear
in the display. "Clean" and "On" will
remain in the display to show that the oven is in a
clean cycle.
If the door is not locked properly, the word "door" will
appear in the display" and beeps will sound.
PAGE 13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CRE9500C and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents