Download Print this page

Maytag CRE9500C Use & Care Manual page 7

Hide thumbs

Advertisement

Clock Pad
Setting
the Clock
and Timer
Use tbis pad to set the time-of-day
clock.
For
instructions to do this, see below.
Clock
To set the time-of-day
clock:
You may also press this pad to recall the current time of"
day. For example, if the timer is counting down in the
1. Press the CLOCK pad once. The words "Set Time"
display, press the CLOCK pad to return the current
will flash in the display.
time to the display. The timer will continue to count
2. Set tile correct time of day using the • and • pads.
down and a signal will sound when the time expires.
• To change the time by one minute, press either
Cook
Time/Oven
Stop
Pads
pad once.
These pads are used to program the oven to start and
• To change the time in increments
of 10 minutes,
stop automatically; either immediately or at a later tinm.
press and hold either pad.
For detailed information
on using Programmed
Oven
When the power is first supplied to the range or if there
Operations, see pages 10-11.
has been a power failure, the display will flash. Follow
Self
Clean
Pad (select
models)
above instructions
to set the clock. The clock time
cannot be changed when the oven is set for a cook or
This pad is pressed to set the oven foraself-cleaaeyele,
self-clean
(select
models)
operation.
Cancel
the
See pages 12 i3 for detailed information
on the self-
operation to set the clock.
clean feature.
Press the CLOCK pad to recall the time of day when
Broil
Pad
another function is displayed.
Use this pad to select broil. Two heat selections
are
Timer
available for broiling--Hi
and Lo. See page i0 for more
broiling information.
To set the timer:
i. Press the TIMER pad once. The words "Set Timer"
Oven
Temp
Pad
will flash in the display:
The oven temperature
is set by pressing this pad and
2. Set the desired time using the • and • pads.
the •
or •
pad. Additional
baking
and roasting
information can be found on page 9.
• Press either pad once
to change the time by 1
minute (if the Timer is set for up to 1 hour), 5
minutes (if the Timer is set for over 1 hour), or 10
minutes (if the Timer is set for over 2 hours).
• Press and hold either pad to change the time in 5
minute or 10 minute increments,
depending upon
the time set in the display.
The TIMER can be set from I mimlte (0HR:01) up to 9
hours and 50 minntes (9 HR:50).
The timing operation
will start automatically.
Colons
will flash in the display to indicate a timing operation.
One long continuous
beep will signal the end of the
timing operation and "End" will briefly appear in the
display. The time of day will automatically reappear in
the dispIay. The TIMER pad does not control the oven.
To cancel:
Press the TIMER
pad and bold for 3
seconds. The time of day will reappear
after a slight
delay.
PAGE 6

Advertisement

loading

  Also See for Maytag CRE9500C