Maytag CRE9500C Use & Care Manual page 6

RANGE CONTROL PANEL
Electronic Clock and Oven Control
&
CANCEL
Styling and features may differ depending on the model you selected.
The electronic clock and oven control on your Maytag The following pads are found on your Maytag
range is used for the time-of-day clock, timer, bake, electronic cloek and oven control:
broil, programmed oven operations and self-clean
(select models) fimctions. A beep will sound each time a Cancel Pad
function pad is pressed. Press this pad to cancel all operations except the time-
The dispFay on the control will flash when power is first of-day clock and timer. If yoti are ever unsure if you've
supplied to the range or ff there is a power thilure. Once programmed the control correctly, press the CANCEL
the time-of-day clock has been set (see Setting the pad and start over.
Clock, page 6), the display will stop flashing. •
and • Pads
The oven will automatically" turn off if it is left on Press or press and hold these pads to enter the time or
for 12 hours, temperature desired. These pads are also used to select
Hi or Lo broih
NOTE: The electronic control is equipped with a
Timer Pad
self-diagnostic feature for service use ONLY. If a
fault code (F plus a number, ex. F1) appears in the The timer can be set from 1 minute to 9 hours, 50
display along with a continuous beeping sound, minutes. It will count down by seconds (when set for 1
press the CANCEL pad. See Before You Call for minute) or minutes (when set for 2 minutes or more
Service (page 17', if the fault code reappears in the time). See page 6 for instructions on setting the timer.
display.
PAGE 5