Advertisement
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Seat Belt Vibration Alert Module
These instructions
Safety Precautions:
• Work in well ventilated area that is clear of obstructions.
• Secure vehicle with tire chucks in both front and rear of tires.
• Turn vehicle accessories OFF and ensure ignition key is in OFF position.
• Wear safety goggles and snug fitting clothes.
• Use tools only for their intended purpose and which are in good repair.
• Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit www.brandmotion.com
ADAS-1020 Instructions 1-10-18
ADAS+ Seat Belt Vibration Alert Module
(Kit # ADAS-1020)
Tools & Supplies Needed:
Wire strippers
Wire cutters
Electrical tape
Zip ties
Plastic panel removal tools
Digital Volt Meter / BCM safe test light
Screwdriver
Socket set
Wrench
Page 1 of 2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BrandMotion ADAS Series
Summary of Contents for BrandMotion ADAS Series
- Page 1 • Only perform this task if confidence, skill, and physical ability permit. NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color instructions, as well as an installation video, please visit www.brandmotion.com ADAS-1020 Instructions 1-10-18...
- Page 2 INSTALLATION INSTRUCTIONS 1. The white plug on the vibration module plugs into the connector on the HUB from the main ADAS-100 unit marked vibrator. 2. The module can be mounted 2 ways. 2a. Insert the module into the black cloth sleeve and attach to the vehicle seat belt. Attach the belt that DOSE NOT move or retract.
Need help?
Do you have a question about the ADAS Series and is the answer not in the manual?
Questions and answers