Probe Commands; Table 13 Probe Command Summary - Fluke 1560 Black Stack User Manual

6.5.4

Probe Commands

This group of commands deals with temperature conversion and probe charac-
terization. The commands are summarized in Table 13. None of the probe pa-
rameters are affected by the *RST command.

Table 13 Probe Command Summary

Command
CALCulate[n]:CONVert:CATalog?
CALCulate[n]:CONVert:COPY
CALCulate[n]:CONVert:DATA?
CALCulate[n]:CONVert:NAME <convert_name>
CALCulate[n]:CONVert:NAME?
CALCulate[n]:CONVert:PARameter:CATalog?
CALCulate[n]:CONVert:PARameter:VALue
<parameter_name>,<numeric_value>
(;<parameter_name>,<numeric_value>...)
CALCulate[n]:CONVert:PARameter:VALue?
<parameter_name>
CALCulate[n]:CONVert:PARameter:VALue? ALL
CALCulate[n]:CONVert:SNUMber <serial_number>
CALCulate[n]:CONVert:SNUMber?
CALCulate[n]:CONVert:SRLow
<sub-range_number>
CALCulate[n]:CONVert:SRLow?
CALCulate[n]:CONVert:SRHigh
<sub-range_number>
CALCulate[n]:CONVert:SRHigh?
CALCulate[n]:CONVert:TEST? <numeric_parame-
ter>
(,<numeric_parameter>)
Action
Query available conversion types
<channel>annel Copy conversion parameters from another channel
Query output of conversion block
Select the conversion type
Query the conversion type
Query a list of conversion parameters
Set conversion parameter values
Query the value of a conversion parameter
Query the values of all conversion parameters
Set the probe serial number
Query the probe serial number
Select a low ITS-90 sub-range
Query the low ITS-90 sub-range
Select a high ITS-90 sub-range
Query the high ITS-90 sub-range
Test the conversion calculation
6 Digital Communications Interface
Commands
81