Table of Contents
Advertisement
Programming and Configuration Manual
33
4.12.1 SERVICE ALARM
Set if the machine shall give a service alarm or not.
YES = Active (how the service alarm shall be triggered is set in SERVICE ALARM OPTION
NO = Not active (no service alarm)
4.12.2 SERVICE ALARM OPTION
Set how the service alarm shall be triggered.
RUN HOURS = Based on run hours. The interval is set in SERVICE ALARM HOURS
CALENDAR DAYS = Based on calendar days. The interval is set in SERVICE ALARM DAYS
CAL. DAYS OR RUN HOURS = Based on both run hours and calendar days
The service alarm is cleared in STATISTICS — LAST SERVICE TIME
4.12.3 SERVICE ALARM HOURS
If SERVICE ALARM is set to RUN HOURS the service alarm will be displayed after the time set in this menu.
The pre-set value is 1600 run hours.
4.12.4 SERVICE ALARM DAYS
If SERVICE ALARM is set to CALENDAR DAYS the service alarm will be displayed after the time set in this menu.
The pre-set value is 365 calender days.
4.12.5 LAST SERVICE TIME
This menu shows the date and time for last service alarm.
SERVICE ALRAM HOURS and SERVICE ARLAM DAYS are counted from this date.
Resettable.
4.13 TMIS
TMIS is a GSM based system, normally connected to a network of machines.
The user can identify himself to a machine via text messaging and provides functionality like for example:
• Possibility to check machine availability in advance
• Preventing the door to be opened for other users
• Text notification when machine is about to be ready
It also allows the owner or service personnel to receive information or control certain functions on machines in the
network via text messaging, such as:
• Message when in error
• Machine occupancy
• Read counters
• Block / unblock machine etc
If TMIS function is enabled on the machine, the TMIS Start message will be displayed after a program is started: "TO
ACTIVATE TMIS, PLEASE SEND TEXT <machine ID> TO <phone number>".
Now the user can choose to use the TMIS functionality or not. By sending the text above, TMIS is activated for the
selected program. If the user does not want to use the TMIS functionality, he can just press the start button shortly to
exit TMIS start message.
If neither of the above is performed, the TMIS Start message will automatically disappear when the time set in TMIS
TIMEOUT SEC. has elapsed.
If TMIS is activated, the TMIS Gateway will forward the user's phone number to the machine. Depending on configu-
ration it is later used to send text messages to the user. It is also to verify that the right phone number is used to un-
lock the door after the program has ended.
When TMIS is activated, the machine will show "TMIS active symbol" on the display, if not, the "TMIS inactive sym-
bol" will be shown. If TMIS is disabled the symbol will not be shown at all. As long as TMIS Start panel is visible, the
regret menu will be temporarily disabled and will not pop up. (Button is used to remove TMIS Start panel).
When TMIS is activated, the PROCESS MENU is disabled during that program.
Hide quick links:
Advertisement
Table of Contents
