General; Activating Service Mode - Electrolux Compass Pro Programming And Configuration Manual

Programming and Configuration Manual
5

1 General

This manual is intended for personnel with the authority to adjust parameters in the machine's existing programs,
programming coin meters, reading statistics and configuring certain interfaces between the machine and the user.
Programming is achieved by using menus on the display while the machine is in service mode.
This manual lists all available menus and submenus and a description of those. Depending on machine model and
program, not all of the menus might be available on your type of machine.

1.1 Activating service mode

Service mode is activated by pressing the service button.
The service mode can also be accessed from the control knob, by a long press, or via the price programming button.
From those views however, not all of the menus will be available. (Password might be needed). Access to the service
mode are different depending on machine model, market and segment.
The service button is found at one of the following locations:
1. At the door on the operating panel.
2. Behind the operating panel. The panel on top of the machine needs to be removed.
fig.7203A
When pressing the service button the machine software will switch to its service mode.