Electrolux Compass Pro Programming And Configuration Manual page 23

Up to 55 programs
Table of Contents

Advertisement

Programming and Configuration Manual
23
4.7.1.35 DEFAULT TRIANGLE OPT.
This menu is only valid for machines with triangle options.
Set the triangle option that shall be used as pre-selection in user interface. Turn the control knob to see the triangle
options.
4.7.1.36 SERVICE MENU TIMEOUT
Set the time for SERVICE MENU TIMEOUT.
The set time is the time that the service menu will be visible on the display when activating service mode if nothing
else is made — turning the control knob.
If and when turning the control knob, you will not exit service mode unless selecting BACK and EXIT SERVICE.
4.7.1.37 YOUR PASSWORD
Set if some of the menus shall be password protected or not. The menus that will be protected by this password are:
• PRICE PROGRAMMING
• PROGRAM PARAMETERS
• LANGUAGE SETTINGS
• USER INTERFACE
• YOUR PASSWORD
• CONFIG. 1
• I/O CONFIGURATION
Set the desired password.
The password can be changed at any time.
0000 = No password
For some markets / segments a default password is set from factory: 9191.
4.7.1.38 SERVICE ALARM
Set if the machine shall give a service alarm or not.
YES = Active (how the service alarm shall be triggered is set in SERVICE ALARM OPTION
NO = Not active (no service alarm)
4.7.1.39 SERVICE ALARM OPTION
Set how the service alarm shall be triggered.
RUN HOURS = Based on run hours. The interval is set in SERVICE ALARM HOURS
CALENDAR DAYS = Based on calendar days. The interval is set in SERVICE ALARM DAYS
CAL. DAYS OR RUN HOURS = Based on both run hours and calendar days
The service alarm is cleared in STATISTICS — LAST SERVICE TIME
4.7.1.40 SERVICE ALARM HOURS
If SERVICE ALARM is set to RUN HOURS the service alarm will be displayed after the time set in this menu.
The pre-set value is 1600 run hours.
4.7.1.41 SERVICE ALARM DAYS
If SERVICE ALARM is set to CALENDAR DAYS the service alarm will be displayed after the time set in this menu.
The pre-set value is 365 calender days.
4.7.1.42 VOLUME VGB
Set the volume in Voice Guidance Board (VGB).
The volume is set in a value between 0 and 255.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents