Table of Contents
Advertisement
Programming and Configuration Manual
34
Door lock function (not valid for tumble dryers)
When program is finished, a message will be displayed, prompting to send a text message or manually enter phone
number to unlock door.
The door will unlock if:
• The user sends the text message from the same phone number that was used to activate TMIS.
• The user manually enters the same phone number that was used to activate TMIS.
• The laundry owner enters the MASTER CODE .
• The time set in UNLOCK DOOR TIMEOUT has elapsed.
Error during program run
If the machine enters error mode, TMIS will send a text message to the phone number that was used to activate
TMIS: "MACHINE ERROR. PLEASE RETURN AND UNLOAD MACHINE".
For more details about the TMIS system please refer to the Product data sheet.
4.13.1 USE TEXT MESSAGING
Enable or disable TMIS communication.
YES = Enable TMIS communication
NO = Disable TMIS communication
Default is NO. This must be set to YES to use TMIS functions.
4.13.2 TMIS TIMEOUT SEC.
Set the time for how long the TMIS start message shall be displayed after program is started. When this time has
elapsed, it is no longer possible to activate TMIS for current program.
The time is set in mm:ss. Default time is 2 minutes.
4.13.3 SET SOON READY MSG
This is to determine when to send the soon ready message "YOUR LAUNDRY WILL BE FINISHED IN xx MINUTES"
to the user. It is based on the estimated remaining time of the program. If set to "0" or no remaining time is available
for current program, the soon ready message will not be sent. The time is set in hh:mm:ss. Default time is 10 minutes.
4.13.4 UNLOCK DOOR TIMEOUT (not valid for tumble dryers)
Set the time that the door shall remain locked after program is finished.
The time is set in hh:mm:ss. Default time is 5 minutes.
If the user has activated TMIS at program start, TMIS will send text messages to the user's phone number: "YOUR
LAUNDRY IS READY, PLEASE UNLOAD THE MACHINE" and "MACHINE DOOR WILL UNLOCK IN xx MINUTES" when
the program is finished. On the display, the TMIS End message "PLEASE SEND TEXT <machine ID> TO <phone
number> OR ENTER YOUR PHONE NUMBER TO UNLOCK DOOR" will be shown.
If no text message is sent or no phone number entered, the door will remain locked until the time set in UNLOCK DOOR
TIMEOUT has elapsed.
If the time is set to "0", the door will automatically unlock immediately when program has ended and the TMIS End
message will not be sent.
4.13.5 MASTER CODE (not valid for tumble dryers)
This is to set the MASTER CODE that can be used by the laundry owner to override the UNLOCK DOOR TIMEOUT in
case needed. By using LONG PRESS while the TMIS End message still is present, the text "PLEASE ENTER MASTER
CODE TO UNLOCK DOOR" will be shown. If correct MASTER CODE then is entered, the door will unlock immediately.
The default master code is 1234. It is recommended to change the default code.
Hide quick links:
Advertisement
Table of Contents
