Electrolux Compass Pro Programming And Configuration Manual page 22

Programming and Configuration Manual
22
4.7.1.26 COIN 2
Set the value for coin slot 2.
Example: If the value is set to 10 the coin value will be displayed as 10 (if the DECIMAL IN PRICE is set to NO) or
00,10 (if the DECIMAL IN PRICE is set to YES).
4.7.1.27 DECIMAL IN PRICE
Set if the price shall be shown with or without decimal.
YES = Decimal in price
NO = No decimal in price
4.7.1.28 PRICE REDUCTION
Set the requested price reduction in % of the set price.
The set price reduction is now valid for all programs and options.
Only available if activated on I/O module type 2.
4.7.1.29 PRICE REDUCTION SCOPE
Set if the price reduction, set in PRICE REDUCTION, shall apply to "Total price" or "Program price".
TOTAL PRICE = Program and options
PROGRAM PRICE = Program only
Turn the control knob to switch between TOTAL PRICE and PROGRAM PRICE.
4.7.1.30 LONG PRESS TIME LIMIT
Set the time that the control knob needs to be pressed when saving.
The time is set in seconds.
The pre-set value is 4 seconds.
4.7.1.31 CLEAN MACHINE
Set the time that the CLEAN MACHINE message shall be shown on the display.
The text is visible on the display when the door is opened after a finished program.
The time can be set in hours, minutes and seconds.
4.7.1.32 DISPLAY CONTRAST
Set the contrast value of the display.
The contrast of the display can be adjusted to adapt to the prevailing light in the room.
The pre-set value is 57.
4.7.1.33 BACKLIGHT TIME
Set the time that will pass before the display will reduce the backlight illumination.
The time can be set in minutes and seconds.
The pre-set value is 30 seconds.
4.7.1.34 DISPLAY WARNING
Set the time that different warnings shall be shown on the display.
The time can be set in minutes and seconds.
The pre-set value is 10 seconds.
Example: If the time is set to 1 minute, DELAYED START ABORTED warning (as an example) will be visible on the dis-
play during 1 minute.