2.2
Connectors
2.2.1
Connector List
CN1
CN2
CN3
CN5
CN6
CN7
CN8
CN10
CN12
CN14
CN15
CN16
CN17
CN18
CN20
CN21
CN22
CN24
CN25
CN31
BH1
2.2.2
Connector Settings
2.2.2.1
12 V Power Input Connector (CN1)
The main power connector supports single 12 V input, with optional DC Jack (CN8,
co-layout with 2-pin power connector).
2.2.2.2
DDRIII SODIMM Socket (CN2)
One 204-pin/H 9.2 mm DDRIII DIMM socket supports DDR3 / DDR3L 1066 MHz for
GX-210JA, 1600 MHz for GX-415GA, up to 8 GB.
2.2.2.3
Display Interface Connections (CN3, CN15 and CN20)
The MIO-2270 display interface supports either VGA or HDMI on rear I/O and is
capable of driving a wide range of flat panel displays, including passive and active
LCD displays.The board features three display connector types; among which, one
rear I/O can accommodate either standard CRT VGA monitors or an HDMI display
and one supports LVDS-type LCD panels.
LVDS LCD panel connector (CN3)
The board supports single-channel 18-bit LVDS LCD panel displays via 14*1-pin
wafer bo. Resolution: up to 1600 x 900.
CRT display connector (CN15)
The CRT display 15-pin connector is a rear I/O connector as coastline used for con-
ventional CRT displays. Resolution: up to 2048 x 1536.
MIO-2270 User Manual
12 V Power input
DDR3 SODIMM
18-bit LVDS panel
HD audio
Inverter power / Internal SATA power
GPIO
DC jack (upon request)
mSATA
COM1 / COM2
Front panel
VGA
MIOe
Gigabit Ethernet
CPU fan
HDMI
SATA
SMBus
Internal USB
External USB
Mini PCIe
Battery
10