–
Input the register offset in the Register Offset field.
–
Click the <read SMBus data> button to view a word of data from the device
will be shown on the Result field.
Write a word
–
Click the <Access a word> radio button.
–
Enter the slave device address in the Slave address field.
–
Input the register offset in the Register Offset field.
–
Input the desired data, such as 0x1234, in the Result field to write to the
device.
–
Click the <write SMBus data> button to write data to the device via the
SMBus.
Read Multiple bytes
–
Click the <Access multiple bytes> radio button.
–
Enter the slave device address in the Slave address field.
–
Input the register offset in the Register Offset field.
–
Input the desired number of bytes, such as 3, in the right field of the <Access
multiple bytes> radio button. The number must be written in decimal.
–
Click the <read SMBus data> button to view all device data, separated using
commas, in the Result field.
Write Multiple bytes
–
Click the <Access multiple bytes> radio button.
–
Enter the slave device address in the Slave address field.
–
Input the register offset in the Register Offset field.
–
Input the desired number of bytes, such as 3, in the field to the right of the
<Access multiple bytes> radio button. The number must be written in deci-
mal.
–
Input all desired data in the Result field in hexadecimal format and divided by
commas, for example, 0x50, 0x60, 0x7A.
–
Click the <write SMBus data> button to write the data to the device via the
SMBus.
MIO-2270 User Manual
48