Display Control
When the application is executed, two blocks of VGA control functions are displayed.
Within the application, users can turn on or off screen shots, and also adjust the
panel brightness if your platform is supported. The functionalities of VGA control can
be tested as follows:
Screen on/off control
–
Click the radio button ON or push the key F11 to turn on the panel screen.
–
Click the radio button OFF or push the key F12 to turn off the panel screen.
–
The display chip of your platform must be in the support list in Appendix A, or
this function cannot work.
Brightness control
–
Move the slider in increments, using either the mouse or the direction keys,
or click the UP button to increase the brightness.
–
Move the slider in decrements, using either the mouse or the direction keys,
or click the DOWN button to decrease the brightness.
49
MIO-2270 User Manual