Jumpers And Connectors - Advantech PCE-3032 User Manual

1.4

Jumpers and Connectors

Connectors on the PCE-3032/4132 single host board link it to external devices such
as hard disk drives and a keyboard. In addition, the board has a number of jumpers
used to configure your system for your application.
The tables below list the function of each of jumpers and connectors. Later sections
in this chapter give instructions on setting jumpers. Chapter 2 gives instructions for
connecting external devices to your motherboard.
Table 1.1: Jumper List
Label
JCMOS1
JME1
JWDT1 JOBS1
Table 1.2: Connectors
Label
LAN1
LAN2
VGA1
KBMS1
COM12
FP1
JCASE1
CPUFAN1
LANLED1
HDAUD1
USB3C1, USB3C2
USB3H1
USB2A1
USB2H1, USB2H2
SATA0
SATA1
SATA2
SATA3
CPU1
DIMMA1
DIMMB1
GPIO1
LPC2
PWR1
DVI1
DP1
EXPCIE1
MINIPCIE MSATA
Function
CMOS clear
Enable ME
Watchdog timer output selection and HW monitor alarm
Function
Intel I211AT (PCE-3032); Intel I210AT (PCE-4132)
Intel I211AT (PCE-3032); Intel I210AT (PCE-4132)
VGA connector
PS/2 keyboard and mouse connector
Serial port: COM1 (RS-232), and COM2 (RS-232)
HDD LED, power LED, SNMP SM_Bus, reset, power on/off
Case Open
CPU FAN connector (4-pin)
LAN1/2 LED extension connector
HD audio extension module connector
USB 3.0 port 1,2 on rear I/O
USB 3.0 port 3, 4 with box header
USB 2.0 port 2 on rear I/O
USB 2.0 port 3-6 with box header
Serial ATA0 (3.0)
Serial ATA1 (3.0)
Serial ATA2 (3.0)
Serial ATA3 (PCE-4132: 3.0)
CPU Socket
Memory connector channel A
Memory connector channel B
GPIO pin header (SMD pitch-2.0 mm)
COM port module expansion pin-header
12 V, 5 V, power connector
Pin header to DVI connector (P/N: 1700021831-01)
Display pin header to stack board
(Display type depends on optional stack board)
Mini PCIe pin header to stack board
M-SATA (default) or mini-PCIe connector (optional for PCE-4132)
5 PCE-3032/4132 User Manual