Setting up the answering machine
Setting up the answering machine
On base station:
Once you have connected your telephone your answering machine is ready for use.
Answering machine AM1 is activated. It records all messages (on all receive MSNs).
AM1 can be played back and set from all handsets (factory default).
As supplied, AM2 and AM3 are not activated (page 52). To be able to use them you must
activate them and assign them their own receive MSN.
You can configure AM1, AM2 and AM3 separately.
Assigning a receive MSN
You can assign one or more receive MSNs to each (shown) answering machine
(AM1, AM2, AM3). However, each receive MSN can only be assigned to one answering
machine (only one recording can be running at any one time).
¢
v
w
Ð
/
s
s
/
v
v
/
s
s
/
Receive MSN
s
s
/
MSN1:
Once an answering machine has been assigned a receive MSN, it can only be set and
operated via handsets/terminals to which the same receive MSN is assigned.
Hiding/showing an answering machine
If you only want to use one or two answering machines for your connection, you can
hide the other answering machine(s) from all displays and menus.
An answering machine can only be hidden if it does not contain any messages or
memos:
If there are new messages/memos you have not yet played back on the answering
◆
machine, you will be notified when you try to hide it. The answering machine will
continue to be shown.
If you wish to hide an answering machine that still contains old messages/memos
◆
that have already been played back, you will be asked if you wish to delete the old
recordings. The answering machine is only hidden if you confirm with
52
CX253isdn
SX255isdn
¢
¢
Base
Settings
Select answering machine, INT91: AM 91 for AM1,
INT92: AM 92 for AM2 or INT93: AM 93 for AM3.
Open the submenu.
Select and confirm.
OK
Select the receive MSN and confirm, e. g. MSN1:
OK
Anna. Only the MSNs that have not yet been
assigned to an answering machine are available.
Repeat this process for all receive MSNs you want to
assign to the answering machine.
SX353isdn
¢
¢
Setup user
Setup device
.
YES