Siemens GIGASET SL55 Manual page 14

Making basic settings
Setting the date and time
Depending on the network provider, the date and time are transferred automatically
from the telephone network during the first outgoing call.
The display shows: Enter time?
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
~
Í
s s
/ Save entry
If the time is to be displayed in 12-hour mode, you can modify the setting later
(page 63).
Showing/hiding answering machines
On base station:
The answering machines AM1, AM2, and AM3 are available. You can use the answering
machine when it is shown.
The display shows: Suppress display of AM1?
Respond with
, if you want to hide AM1,
◆
YES
, if you want to use AM1.
◆
NO
This procedure is then repeated for AM2 and AM3.
i
An answering machine can only be hidden if there are no messages/
memos stored in it (page 52).
Finding your phone numbers (MSN)
This function must be supported by your network provider.
The display shows: Find own numbers (MSN)?
Several phone numbers (MSN) were provided by the network provider when you
received your ISDN connection confirmation. You can store up to 10 phone numbers.
If an MSN has not been entered on your telephone, you can retrieve the phone numbers
from the telephone exchange.
Confirm the prompt with
If your MSNs can be found, the number of MSNs found will be shown on the display
◆
and the MSNs entered.
If no MSNs can be found (e. g. because MSNs are already entered or the network
◆
provider does not support this function), a corresponding message is displayed. You
will then need to enter the MSNs manually (see next section).
Setting up the base station – Getting started wizard
Press the display key to set the date and time.
Enter the date (6 digits) and time (4 digits in
24-hour mode) in turn, e. g. 101204 0945 for
12/10/04 9:45 a.m..
Press the display key to open the submenu.
Select and confirm.
OK
CX253isdn SX255isdn
.
YES
SX353isdn
13