Identify Caller - Siemens GIGASET SL55 Manual

Making calls
Checking and deleting a callback
To delete an incoming callback:
The handset is ringing and the screen displays the callback number.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
DELETE
To check or delete the callback before it arrives:
¢
v w Ð
/
s
Callback
either ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
DELETE

Identify caller

Identify caller is used to identify annoying or threatening callers.
Requirement: You have requested the Identify caller function from your network pro-
vider.
Activate this function during the call or immediately after the caller has hung up.
You must not end the call yourself.
i
You must not press the End call key!
v v
/
s s
/ Identify caller
The caller is identified in the telephone exchange and is recorded by phone number,
time and date. A printout of the list is sent later by your network provider.
22
Press the display key. The callback function is can-
celled.
¢ ¢
Base Status
Select and confirm. The current callback number is
OK
shown on the screen.
Check:
Press the display key. Callback remains active.
Cancel:
Press the display key. The callback function
is cancelled.
Open the menu.
Select and confirm.
OK