Siemens GIGASET SL55 Manual page 95

Operation with door intercom
Door intercom call waiting
Accepting call waiting
Press the
ACCEPT
If the interrupted call is an internal call, this connection is broken when you accept the
waiting call.
If the interrupted call is an external call, this call is put on hold when you accept the wait-
ing call. Both parties are shown on the display, the current one is marked.
Internal call with door intercom
You can make an internal call to the door intercom (page 17).
Diverting the door intercom externally
On base station:
Calls from the door intercom can be diverted to an external phone number. The internal
subscribers from the door intercom call group are still called if external call diversion is
set up.
The setting for the destination for external diversion, either in the exchange or in your
base station (page 72) also applies to call diversion for the door intercom.
Entering/changing the destination number for external call diversion
¢
v w Ð
/
s s
/ INT21: Int.21
Í
s s
/ Forw. door call
Í
Í
Change number
~
Í
Save entry
94
display key. You accept the waiting call.
SX205isdn SX255isdn
¢ ¢
Base Settings
Select a set up door intercom, e. g. INT21: Int.21.
Press the display key to open the submenu.
Select and confirm.
OK
Press the display key to display the destination
number. If a destination number has not yet been
entered, <empty> is displayed.
Press the display key to open the submenu.
Confirm.
OK
Enter the new or changed destination number.
Press the display key to open the submenu.
Confirm.
OK
SX303isdn
¢ ¢
Setup user Setup device
SX353isdn