Time Functions; Setting The Date And Time; Night Service - Siemens GIGASET SL55 Manual

Time functions

Setting the date and time

The first time you make a call on your phone, the date and time are transmitted by the
exchange.
You can choose between 12 hour and 24 hour format for the time (a.m. = 1st half of the
day; p.m. = 2nd half of the day).
¢ ¢
v w Ð
/
either ...
s s
/ 12 hours
s s
/ Date DD.MM
or ...
Set time
~
Í
Save entry

Night service

For each receive MSN, you can set up a call diversion every day or for a particular period
of time (Start time to End time) and, if required, at the weekend (Sat/Sun all day) to
automatically divert all incoming calls to an external phone number, to a different inter-
nal subscriber or, on a Gigaset with integrated answering machine, to the answering
machine. For example, when a business is closed (from 6:00 p.m. to 8:00 a.m.) all calls
from the office can be diverted to a private number.
When diverting a call externally, only the MSN which is assigned to the handset as the
receive MSN can be diverted from that handset.
By default, night service is deactivated. To activate the night service function, the des-
tination for the call diversion must first be specified.
i
If an external call diversion has already been set up for a receive (page 70)
MSN, it is not possible to activate night service for that receive MSN.
Setting the destination
Requirement:. Night service is deactivated (page 65)
¢ ¢
Base Settings
To select display modes:
If necessary, choose between 12 hours and
OK
24 hours display format (‰ = on).
If necessary, choose between Date DD.MM (day-
OK
date) and Date MM.DD (date-day) format (‰ = on).
To set the date and time:
Select and confirm.
OK
Enter the date and time. If necessary, use
skip details that are already correct.
For 12 hours format, if necessary use the
display keys to switch between am and pm.
Press the display key to open the submenu.
Select and confirm to store the setting.
OK
¢
System settings Date/time
Time functions
z {
to
and
AM PM
63