Paper Is Not Fed From Manual Feed Slot - Brother MFC-J5335DW Service Manual

Lubricant type: Permalub BAN-5
Lubricant amount: 3.0 mm diameter ball

4.2.2 Paper is not fed from manual feed slot

< User Check >
- Check that recording paper is loaded correctly in the manual feed slot.
- Check thickness of recording paper is within tolerance of each type.
- Check only a single recording paper enters.
Step
1 Paper feed motor harness
connection failure
2 Registration actuator out of
place
3 Paper feeding path parts out of
place
4 Registration sensor defective
5 Paper feed motor defective
6 Manual feed slot defective
7 Main PCB defective
Maintenance unit
Apply grease here.
Fig. 2-8
Cause
Reconnect the paper feed motor harness.
Set the registration actuator into place.
Set the paper feeding path parts into place.
Replace the registration sensor PCB ASSY.
Replace the paper feed motor.
Replace the manual feed slot.
Replace the main PCB.
2-54
Solution
Confidential