Installation - Sanremo TORINO SAP Instruction Booklet

ENGLISH
This manual is for use by qualified personnel and contains information and tips to use and keep your coffee maker as efficiently as possible. Please
read all instructions very carefully before you actually use your machine to make sure the machine works properly and to ensure a long working life.
Instructions are part of the product. Please keep this document. The appliance is not intended for use by persons (including children) with reduced
physical or motor capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. This booklet refers to the following models:
Semi-automatic with continuous delivery via LED keypad and continuous manual delivery switch. Available in 2 group version.
Electronic microprocessor controlled model with quantities programmable by LED keypad and switch for continuous manual delivery. Available in
2 group version.
WIDTH (X)
DEPTH (Y)
HEIGHT (Z)
CAPACITY
NET WEIGHT
GROSS WEIGHT
SUPPLY VOLTAGE
ABSORBED POWER RESISTOR (230V)
ABSORBED POWER CUP WARMER RESISTOR
ABSORBED POWER ELECTRIC PUMP
ABSORBED POWER EXTERNAL ELECTRIC PUMP
POWER SOLENOID VALVES
ABSORBED POWER AUTOMATIC LEVEL REGULATOR
BOILER WORKING PRESSURE
MAINS WATER PRESSURE (MAX)
COFFEE DELIVERY PRESSURE
The weighted sound pressure A of the appliance is less than 70 dB.
For correct operation and maintenance of the appliance you should follow this manual precisely, respecting the instructions and referring to the diagrams.
RISK GROUP 1 in accordance with EN 62471:2008 RISK GROUP 1 in accordance with IEC 62471:2006
Before installing the appliance ensure that the mains voltage and power correspond to the data given in the specifications table. Take the appliance
out of the packaging and put it in its final place of installation ensuring that it is stable and safe and that there is the necessary space for using it.
Place the machine in a way that the distance between the grid and the floor is wider than 1,5 mt. To clean the internal circuit more efficiently, you
are recommended to empty and fill the boiler a number of times and deliver simple water and coffee to be thrown away.
FOREWORD
Model – TORINO SAP
Model – TORINO SED
TECHNICAL CHARACTERISTICS
LIGHTS ASSEMBLY:

INSTALLATION

25
GROUPS
mm
mm
mm
litres
kg
kg
V 220-240 1N~
380-415 3N~
kW 2,95/4,9
kW
kW
kW
kW
kW
(1.8 Bar) MPa 0,08:0,1
(1-1.2 Bar) MPa
(8-9 Bar) MPa
2
780
590
580
12
62,7
65
120
0,2
0,2
0,2
0,0225
0,01
0,6
0,8/0,9