Specifications; Installation - Sanremo CAPRI SAP Instruction Booklet

ENGLISH
This instruction booklet contains all the necessary information and advice for best possible use and
storage of your coffee machine.
This booklet refers to the following models:
Semiautomatic with continuous dispensing and solenoid valve controlled by rocker switch located on the
control panel. Available in 1, 2 group versions.
Microprocessor-controlled electronic model with programmable dosing through a keypad with indicator
lights. Available in 1, 2 group versions.
Width
Depth
Height
Capacity
Voltage
Heating element input
Electric pump input
Solenoid valve input
Automatic level controller input
Boiler design pressure
Boiler working pressure
Safety valve calibration pressure
Exchanger design pressure
Exchanger safety valve calibration pressure
Mains water pressure (max)
Coffee dispensing pressure
The weighted sound pressure level A of the coffee machine is less than 70dB.
For correct appliance operation and trouble-free maintenance, please read this booklet carefully and
comply with the instructions and rules, also referring to the diagrams given in it.
Before installing the appliance ensure that the mains voltage and power correspond to the data given in
the specifications table. Take the appliance out of the packaging and put it in its final place of installation
ensuring that it is stable and safe and that there is the necessary space for using it.
Connect the power cable to the mains supply through a circuit breaker with suitable capacity. The
appliance must also be efficiently earthed.
N.B. CHECK THAT THE DATA ON THE RATING PLATE CORRESPOND TO YOUR MAINS ELECTRICITY
SUPPLY.
1) Only cold water must be supplied to the appliances.
2) If the mains water pressure exceeds 6 bar, a pressure reducer must be installed to regulate the outlet
pressure to a maximum of 6 bar.
Model – CAPRI SAP
Model – CAPRI SED

SPECIFICATIONS

INSTALLATION

Electrical connection
Water connection
GROUPS
mm 430
mm 485
mm 505
litres 4,5
V 120/230/400
kW 1,95/2,4
kW 0,3
kW 0,0135
kW 0,01
(2 Bar) MPa 0,2
(0,8-1 Bar) MPa 0,08:0,1
(1,8 Bar) MPa 0,18
(20 Bar) MPa
(12 Bar) MPa 1,2
(6 Bar) MPa 0,6
(8-9 Bar) MPa 0,8/0,9
1 2
600
485
505
8,6
120/230/400
2,7/4,5
0,3
0,0225
0,01
0,2
0,08:0,1
0,18
2 2
1,2
0,6
0,8/0,9
19