Installation; Electrical Connection; Installing The Power Supply Cable - Sanremo Milano LX SAP Instruction Booklet

ENGLISH

INSTALLATION

Before installing the appliance ensure that the mains voltage and power correspond to the data
given in the specifications table. Take the appliance out of the packaging and put it in its final place
of installation ensuring that it is stable and safe and that there is the necessary space for using it.
Place the machine in a way that the distance between the grid and the floor is wider than 1,5 mt.

Electrical connection

Before connecting the power cable, follow the instructions below to install a safety switch and of
the proper capacity:
Install ground cable, then phase cables. Uninstall phase cables first and then ground if needed.
Make sure the ground connection complies with existing standards and regulations.
N.B. CHECK THAT THE DATA ON THE RATING PLATE CORRESPOND TO YOUR MAINS
ELECTRICITY SUPPLY.

INSTALLING THE POWER SUPPLY CABLE

35