Table of Contents
Advertisement
ENGLISH
1. Unpack the machine and place it a secure, stable worktop, making sure there is sufficient space to
use it.
2. The appliance should be placed high enough to prevent easy access by children
3. Do not position it in proximity to tight passageways or corridors to avoid it being knocked.
4. Check the appliance is complete and has not been damaged (if in doubt call an After-Sales Service
Centre).
5.
Take out the water tank (O) from its compartment (N), clean it, fill it with drinking water (preferably as
soft as possible), replace it in the compartment (N) returning the tubes in the tank.
6. Check that the data on the rating plate correspond to your mains electricity supply (e.g. 230 Volts,
etc)
7. Plug the power cable (Q) into the mains socket.
8. Switch the rear power switch (P) of the appliance to "I"
9. Wait for the green light (C) to go out before dispensing for the first time, to ensure that the correct
temperature has been reached.
A - Orange LED - Power indicator - lights up to indicate the power supply is on
B - Red LED – No water – lights up to indicate the water tank is empty
C - Green LED – Temperature – lights up to indicate that the working temperature has been reached
D - Hot water button
E - Coffee button
F - Pod compartment flap
G - Hot water tube
H - Coffee tube
I
- Drainer
L - Drip tray
M - Water tank lid
N - Water tank compartment
O - Water tank
P - Power switch
Q - Power cable
R - Steam button.
S - Steam nozzle
INSTALLATION
USER INSTRUCTIONS
17
Advertisement
Table of Contents
