Rack And Cabinet Requirements; Cabinet Requirements For Acx1000 And Acx1100 Routers; Table 19: Cabinet Requirements And Specifications For The Acx1000 And Acx1100 Router - Juniper acx1000 User Manual

CHAPTER 6

Rack and Cabinet Requirements

Cabinet Requirements for ACX1000 and ACX1100 Routers

Table 19: Cabinet Requirements and Specifications for the ACX1000 and ACX1100 Router

Cabinet Requirement
Cabinet size
Cabinet clearance
Copyright © 2017, Juniper Networks, Inc.
Cabinet Requirements for ACX1000 and ACX1100 Routers on page 51
Rack Requirements for ACX1000 and ACX1100 Routers on page 52
You can mount the router in a cabinet that contains a 19-in. (48.3 cm) rack.
Cabinet requirements consist of:
Cabinet size
Clearance requirements
Cabinet airflow requirements
Table 19 on page 51 provides the cabinet requirements and specifications for the router.
Guidelines
You can mount the router in a cabinet that contains a 19-in.
(48.3 cm) rack as defined in Cabinets, Racks, Panels, and
Associated Equipment (document number EIA-310–D)
published by the Electronics Industry Association
http://www.eia.org
( ).
NOTE: The cabinet must meet the strength requirements
to support the weight of the router.
The minimum cabinet size must be able to accommodate
the maximum external dimensions of the router.
The outer edges of the mounting brackets extend the width
of the chassis to 19 in. (48.3 cm).
The minimum total clearance inside the cabinet is 30 in.
(76.2 cm) between the inside of the front door and the inside
of the rear door.
51