Microphone Unit Assembly - Sony PMW-EX1 Service Manual

2-2-23. Microphone Unit Assembly

1. Refer to Sections from 2-2-3 to 2-2-5 and
disassemble the unit up to "Handle Assem-
bly" removal.
2. Refer to Section 2-2-22 and disassemble the
unit up to "KSW-53 board, HN-320 board"
removal.
3. Turn the LCD block in the direction of arrow
"A".
4. Remove the four screws and disengage the
four claws, and remove the blind plate in the
direction of arrow "B".
5. Remove the two screws.
6. Pull out the harness (KSW53-MA161) and
the harness (KSW53-RM213) from the hole
on the handle in the direction of arrow "C".
7. Remove the microphone unit assembly in the
direction of arrow "D".
n
Be careful not to hook or damage the har-
nesses.
8. Reinstall the microphone unit assembly by
reversing the steps of removal.
PMW-EX1
Four claws
B
Blind plate
A
LCD block
P2 tapping
2 x 5
hole on the handle
C
D
P2 lock ace
2 x 4
Blind plate
Harness (KSW53-MA161)
Harness (KSW53-RM213)
Microphone unit assembly
2-21