Replacement Procedures; Lithium Battery; Case (Bottom) L/R And Front Panel Assembly - Sony PMW-EX1 Service Manual

2-2. Replacement Procedures

2-2-1. Lithium Battery

1. Loosen the screw, and remove the lithium
battery lid.
2. Remove the lithium battery.
3. Reinstall the lithium battery by reversing the
steps of removal.
2-2-2. Case (Bottom) L/R and Front
Panel Assembly
1. Remove the lithium battery. (Refer to Section
2-2-1.)
2. Remove the four screws of a, and remove
the bracket (tripod).
3. Remove the six screws of b and one screw
of c, and remove case (bottom) L and case
(bottom) R.
2-2
Removing lithium battery
Battery holder
Lithium battery
Loosen the screw.
Lithium battery lid
Lithium battery
b
Case (bottom ) L
Bracket (tripod)
b
c
a
a b
a
: P2 lock ace 2 x 6
b
: P2 lock ace 2 x 4
c
: P2 lock ace 2 x 3
b
Case (bottom ) R
PMW-EX1