Battery Case, Tx-115 Board - Sony PMW-EX1 Service Manual

2-2-11. Battery Case, TX-115 Board

1. Refer to Sections from 2-2-1 to 2-2-5 and
disassemble the unit up to "Handle Assem-
bly" removal.
2. Refer to Sections from 2-2-7 to 2-2-10 and
disassemble the unit up to "RE-250 Board /
RE-251 Board" removal.
3. Remove the tape that fixes the coaxial cable
connected to the BNC connector.
4. Remove the five screws of a and remove
the battery case assembly.
5. Remove the screw of b.
6. Remove the two screws of c.
7. Remove the three screws of d and remove
the bracket.
PMW-EX1
a
Tape
Coaxial
cable
b
Bracket
c
d
a
a
a
a
Battery case
assembly
a
: P2 lock ace 2 x 4
b
: P2 lock ace 2 x 2
c
: P2 lock ace 2 x 3
d
: P2 lock ace 2 x 3
2-11