Download Print this page

Using The Cuff - Walgreens WGNBPA-940A Manual

Automatic arm
Hide thumbs

Advertisement

Table of Contents
USING THE ARM CUFF
Very Important: Proper cuff size is critical to accurate
measurement.
This monitor comes with a standard size arm cuff
that fits arms 9"-13" (23 cm-33 cm).
This cuff is suitable for your use if the colored arrow
falls within the solid color line as shown below. If
the arrow falls outside of the solid color line, you
will need to contact HoMedics Consumer Relations
for a One Size Fits Most UltraSoft ™ arm cuff (9"-17",
23cm - 43cm) at 1-800-466-3342.
Colored Arrow
Center tube over
middle of arm
Solid Colored Line
13
1. If the cuff is not assembled, pass the end of the
cuff furthest away from the tubing through the metal
D-ring in order to form a loop. The smooth side without
the felt material should be on the inside of the cuff loop.
End of cuff
D-ring
2. Plug the cuff tube into the left side of the unit.
Insert plug here
3. Open the arm cuff so that your arm may be placed
through it.
4. Remove tight fitting clothing from your upper left arm so
that the cuff can be wrapped around your exposed arm.
14

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

  Related Manuals for Walgreens WGNBPA-940A