Applying The Cuff - Walgreens DELUXE WRIST WGNBPW-210 Manual

APPLYING THE CUFF

1. Remove all watches, wrist jewelry, etc.
prior to attaching the wrist monitor.
Clothing sleeves should be rolled up and
the cuff should be wrapped around bare
skin for correct measurements.
2. Apply cuff to left wrist with palm facing up
as shown in Fig. A.
3. Make sure the edge of the cuff is about
1/4"–1/2" (1cm–1.5cm) from the palm as
shown in Fig. B.
4. In order to ensure accurate
measurements, fasten the hook and loop
strap securely around your wrist so there
is no extra space between the cuff and
the wrist. If the cuff is not wrapped tight
enough, the measurement values will not
be accurate.
5. If your physician has diagnosed you with
poor circulation in your left arm, place the
cuff around your right wrist as shown in
Fig. C.
NOTE:
• This device should not be used when
your wrist is wounded or injured.
• If it is not possible to use the cuff on your
left wrist, it can also be used on your
right wrist. However, all measurements
should be made using the same wrist.
Fig. A
15
Fig. B
Fig. C