Infotainment Settings - Columbus, Amundsen, Bolero; Infotainment System Settings - Skoda SUPERB Owner's Manual

Infotainment settings - Columbus, Amundsen, Bolero

Infotainment system settings

sound settings
›
Tap the sensor field and then the function surface  .

Volume - Volume settings
■
Radio announcements - Volume adjustment of traffic announcements (TP)
■
Navigation announcements - Volume adjustment of navigation announcements
■
(does not apply to infotainment Bolero)
Voice control - volume setting for voice output
■
Maximum switch-on volume- - Setting the maximum volume when switching on
■
Infotainment
Speed-dependent Volume adjustment - Increases the volume as speed increases
■
Bluetooth audio: - Volume setting of the device connected via Bluetooth
■
dio profile
Quiet - Low volume
■
Medium - Medium volume
■
Loud - High volume
■
Entertainment fading while parking - Lowers the audio volume (e.g. radio volume)
■
when the parking aid is activated
■ Entertainment fading (nav. announcements) - Lowers the audio volume (e.g. radio
volume) in the event of a navigation announcement
Voice Enhancer - Volume adjustment of voice amplification for driver and front
■
passenger to the speakers in the rear
Bass - Mid - Treble - Setting the equalizer
■
Balance - Fader - Sets the balance between left and right, front and rear
■
CANTON Equaliser - Setting the equalizer
■
■ Individual- Adjustment of treble, mid and bass
Profile - Setting of the profile (e.g. Rock, Classical and so on.)
■
CANTON Optimisation -Setting the optimum room sound perception
■
All areas - Setting optimised for the whole vehicle interior
■
Front - Optimised setting for the front seats
■
Driver - Optimised setting for the driver
■
CANTON surround - Setting the surround sound levels ("-9 "Stereo / "+9"full
■
surround)
Subwoofer - Subwoofer volume settings
■
Sound focus -Setting the optimum room sound perception
■
All areas - Setting optimised for the whole vehicle interior
■
Driver - Optimised setting for the driver
■
Touchscreen tone - Switch on/off audible tone when touching the screen
■
No navigation sound during call - Switching on / off the nav. announcements dur-
■
ing a telephone conversation (does not apply to Infotainment Bolero)
Screen settings
›
Tap the sensor field and then the function surface  → Screen.

Menu: - Setting the infotainment menu display
■
Horizont. Display - Horizontal display
■
Grid display - Grid display
■
Switch off screen (in 10 seconds) - Enable/disable the automatic power off func-
■
tion
Display clock when screen is off - Time and date display when the screen is
■
®
au-
switched off
Brightness: - Adjusts the brightness of the screen
■
Touchscreen tone - Switch on/off audible tone when touching the screen
■
Menu button tone - Enable/disable the audible tone when pressing a button next
■
to the screen (applies to Infotainment Columbus)
Hand gesture - Enable/disable the gesture control using hand movements via
■
the Infotainment screen (applies to Infotainment Columbus)
■ Visual hand gesture feedback - Enable/disable the animation when a gesture is
recognised (applies to Infotainment Columbus)
Audible hand gesture feedback - Enable/disable acoustic signal when a gesture is
■
recognised (applies to Infotainment Columbus)
Animation when finger near screen - Turn the proximity sensors on/off (When the
■
function is on, e.g.Navigation will be shown in the main menu when moving a
finger towards the bottom bar with the functional surfaces on the screen)
■ Show clock in standby mode - Time and date displayed on the screen when the
ignition is switched on and Infotainment is switched off
Time and date settings
›
Tap the sensor field and then the function surface  → Time and date.

Clock time source: - Setting the time source: manual/GPS (applies to Infotain-
■
ment Columbus, Amundsen)
Time: - Time settings
■
Summer (DST) - Switches summer time on/off
■
Infotainment settings - Columbus, Amundsen, Bolero
» Fig. 182 on page 128
» Fig. 181 on page 128

133