Clearing Stored Test Results - Bayer HealthCare Bai An Jie 2 User Manual

Clearing Stored Test Results

To clear the stored results from your meter, follow these
simple steps:
1. Open the button door.
2. Press the button.
3. Press the button again
and hold it.
4. While holding the
press and hold the
5. Hold both buttons together
until all three dashes are
continuously lit (for about
3 seconds).
If you change your mind and do not want to clear results,
simply let go of the buttons before all three dashes have
been lit.
28
Bayer Customer Service: (852) 8100 6386
button,
button.
S F :
ETUP UNCTION
Helpful Hint:
You can press the
during Setup to turn the meter off. Just remember to
press the button fi rst to store your changes!
Setting the Time
1. Open the button door
(see page 3).
2. Press .
3. Press or as needed to
change the hour.
When the correct hour is
being displayed, press
accept it and move on.
4. Press or to change
the minutes.
Press to accept and
move on.
Helpful Hint:
You may
want to change the time when
you travel to a different time
zone or when the time changes
with daylight savings time.
www.bayerdiabetes.com
button at any time
to
29