Viewing Stored Test Results; Testing With A Control Solution - Bayer HealthCare Contour TS User Manual

Viewing Stored Test Results:

With the meter off, press and
release on the meter to view
stored test results.
The 14 day average will appear
on the display with the average
of test results taken over the last
14 days.
Press to review previous
test results.
Previous test results: Test re-
sults will be shown starting with
the most recent. Each result will
show the date and time the test
was taken.
You can press to scroll
through the results. You can
press and release the button to
view stored results one at a time
or you can hold it to move through results continuously.
When appears on the dis-
play, you have viewed all of the
results in the memory.
The meter will hold 250 test
results in the memory. When the
memory is full, the oldest test
result will be removed as a new
test is completed and saved to
the memory.
Press to turn the meter off, or it will automatically turn off after
three minutes.
For Customer Service Support:
Hong Kong (852) 8100 6386; South East Asia Contact: (65) 6496 1974
16
Email: diabetescare@bayer.com

Testing with a Control Solution:

You should perform a control test:
• When using your meter for the fi rst time
• To check if you are testing correctly
• When you open a new vial of strips
• If you leave the test strip vial open for an
extended period of time
• If you think your meter may not be working
properly
• If your test results do not match how you feel
Low, Normal and High Control Solutions are available.
®
Always use C TS control solutions, as other brands
ONTOUR
could present incorrect results.
Remove a test strip from the bottle.
Tightly close the bottle lid immediately after you have
removed the test strip. Excess moisture could damage the
test strip.
NOTE: Check the expiration
date and discard date of the
control solution and test strips.
Make sure the test strip does
not appear torn or damaged.
Hold the test strip with the grey
end facing up.
Insert the grey end into the orange
test strip port on the meter.
The meter will turn on. A test
strip with a fl ashing blood drop
will appear letting you know the
meter is ready to test. Do not
apply control solution to the test
strip until the blood drop symbol
fl ashes.
www.bayerdiabetes.com
17