Bayer HealthCare Bai An Jie 2 User Manual page 7

Insert Disc
3. Insert a new 10-test disc (with
the bumpy side up), aligning
the 5 notches in the disc with
the tabs on the meter.
Close Meter
4. Close the meter and
snap it shut. Keep
the meter fl at when
closing it.
Helpful Hint:
The meter must be kept fl at when
closing. If the meter is not kept fl at, the disc may move
and become damaged and you may waste test strips.
8
Bayer Customer Service: (852) 8100 6386
Counting the Number of Strips Left
Your (Bai An Jie )
meter will automatically count
down the number of test strips
you have left. The number is
shown with your test result. To
see the count when the meter
button.
is off, press the
NOTE:
This count is reset to 10
every time you open the meter.
To keep an accurate count,
open the meter only when all
10 of the test strips have been
used in the 10-test disc.
Your meter will also tell you
when you need to insert a new
10-test disc. It will do this by
showing a picture of a disc
being inserted into the meter.
www.bayerdiabetes.com
9