Marking A Control Test - Bayer HealthCare Bai An Jie 2 User Manual

Compare this control test
result with the control range
printed on the bottom fl ap
of the carton of
(Bai An Jie ) test strips.
NOTE:
You will want to "mark"
your Control test now so that it
will not be included in your averages.

Marking a Control Test

Marking a test result as a control test excludes it from
being included in your test averages.
You must mark the result immediately after the test is
performed—while the result is still displayed on the
screen. To do this, follow these steps:
5. Open the button door.
Press the button to mark
as a control.
The symbol indicates a
control result.
Press to accept.
24
Bayer Customer Service: (852) 8100 6386
LOW LOW NORMAL NORMAL HIGH HIGH
CONTROL RANGES CONTROL RANGES
2.6-4.8 5.8-8.3 13.9-18.1 2.6-4.8 5.8-8.3 13.9-18.1
mmol/L mmol/L
1A2164AA 1A2164AA
LOT: LOT:
2007-03 2007-03
EXP: EXP:
6. To release the used test strip,
hold the meter with the test
strip pointing down over a
waste container. Press the
release button. Be sure the
heel of your hand is not
against the meter handle.
NOTE:
If you block the meter
handle with your hand, the test
strip may not release properly.
7. Press to turn your meter off.
www.bayerdiabetes.com
25