Bayer HealthCare Bai An Jie 2 User Manual page 9

NOTE:
After the meter handle
is pushed in, the release button
is UP, a test strip is pushed out,
and a series of "apply blood"
prompts appears. The meter
is now ready to run a blood
glucose test.
CAUTION:
• Your meter is designed to push out one test strip at
a time. Do not attempt to push out a new test strip
with one already showing.
• Discard any test strip that has been removed from
the meter. Never re-insert a test strip into the meter.
Get the Blood Drop —
Fingertip Testing
The puncture depth depends
on the endcap setting and the
amount of pressure applied
to the puncture site. You will
quickly determine which combi-
nation works best for you.
6. Press the endcap fi rmly
against the puncture site and
press the blue release button
with your thumb.
12
Bayer Customer Service: (852) 8100 6386
Use the
Gray
endcap!
Shallow Deep
Puncture Puncture
7. Stroke your hand and fi nger
towards the puncture site to
form a drop of blood. Do not
squeeze around the puncture
site.
8. Test immediately after a good
blood drop has formed.
Test
9. Your test strip is like a
straw—it sips in a sample of
blood. Move the entire front
edge of the test strip until
it touches the edge of the
blood drop. The blood
is automatically pulled into
the test strip and fi lls the
test strip.
Hold the test strip in place
until the meter beeps, then
move the meter away.
www.bayerdiabetes.com
13