Bayer HealthCare Bai An Jie 2 User Manual page 8

Hide thumbs Also See for Bai An Jie 2:
Table of Contents

Advertisement

R
B
UNNING A
LOOD
1. Wash your hands well with
soap and warm water. Rinse
and dry thoroughly.
NOTE:
For testing sites other
than fi ngertips, see page 20.
Prepare Lancing Device
Refer to the M
2 insert
ICROLET
for complete instructions.
2. Remove the endcap from the
M
2 lancing device
ICROLET
with your thumb on the grip
indent as shown.
3. Loosen the round protective
cap on a lancet by rotating it
¼ turn but do not remove it.
Always use M
ICROLET
for best operation.
Insert the lancet fi rmly into
the lancing device until it
comes to a full stop. This will
cock the device. You can also
pull and release the cocking
handle.
10
Bayer Customer Service: (852) 8100 6386
G
T
:
LUCOSE
EST
lancets
Twist off the lancet cap. Be
sure to save it for disposing
of the used lancet.
4. Replace the gray endcap
prior to getting your blood
drop.
Push Out Test Strip
5. Your
(Bai An Jie )
meter uses a special, easy-to-use
"Pull and Push" design.
Here's how it works:
Hold the meter comfortably
in one hand. Firmly grasp the
meter handle with the other
hand (shown here). Now, just
"Pull and Push"—"Pull" the
handle out until it stops and "Push"
it back in until it stops again.
Helpful Hint:
There is no
need to turn the meter on—
just "Pull and Push."
www.bayerdiabetes.com
11

Advertisement

Table of Contents
loading

Table of Contents