Marking A Deleted Blood Test - Bayer HealthCare Bai An Jie 2 User Manual

For best results:
• Blood is pulled IN the test
strip, not dropped ON.
• Do not allow blood to
run down into the meter.
• Do not add more blood
to the test strip after the
meter beeps.
10. After the beep, the display
counts down from "5" to "1. "
14
Bayer Customer Service: (852) 8100 6386
Your test result then appears
on the screen.
Helpful Hint:
The number
displayed in the upper left cor-
ner is the number of test strips
remaining in your 10-test disc.
IMPORTANT:
If you want to
mark this result as a deleted
blood test, you must do that
now, while the result is still be-
ing displayed. See "Marking a
Deleted Blood Test" on page 18.
11. To release the used test
strip, hold the meter with
the test strip pointing down
over a waste container.
Press the release button.
Be sure the heel of your
hand is not against the
meter handle.
NOTE:
If you block the meter
handle with your hand, the test
strip may not release properly.
12. Press the button to turn the meter off.
NOTE:
If you forget to turn your meter off, it will
turn off automatically after three minutes. This will
save battery power.
www.bayerdiabetes.com
15