Mitsubishi Electric AG-150A Instruction Book page 10

3-1-2 Encrypting the communication data and login on the AG-150A
AG-150A can encrypt communication data using HTTPS (SSL).
When connecting the AG-150A to the LAN that can be accessed by the general public, it is recommended that
the following settings be made so that the units are monitored and controlled on the encrypted Web page.
Note: Depending on the operating system or the version of Java, HTTPS encrypted messages may not be handled
correctly. If this happens, use a HTTP connection to monitor and control the units as noted in the section
above.
(1) Go to [Tools]->[Internet Options]->[Advanced], and make the
following settings.
Use SSL 2.0
Use SSL 3.0
Use TLS 1.0
Do not save encrypted pages to disk
Note: Some of the settings may have different names depending on
the Web browser version.
(2) Click on [Java] in the Control Panel, and make the settings for the
items under [Security] in the [Advanced] tab.
Use SSL 2.0 compatible Client Hello format
Use SSL 3.0
Use TLS 1.0
Note: Some of the settings may have different names depending on
the Java version.
(3) Prefix the Web address with [https], enter the address, and hit the
[Enter] (Return) key on the keyboard.
https://[IP Address of the AG-150A]/administrator.html
Note: For example, type "https://192.168.1.1/administrator.html" if the
AG-150A IP address is [192.168.1.1].
If the security alert is disabled as described in the note in the following
and the subsequent sections, encrypted date communication will
begin, and the Login screen will appear. If the security alert has not
been disabled, take the following procedures.
Item
Item
Checkbox setting
Uncheck the box.
Check the box.
Uncheck the box.
Check the box.
Checkbox setting
Uncheck the box.
Check the box.
Uncheck the box.
10