Mitsubishi Electric AG-150A Instruction Book page 33

3-7-1-2 Setting the Weekly Schedule for HWHP (CAHV) group
If a HWHP (CAHV) group has been registered, the [Air Conditioners] and [HWHP] buttons will appear as
shown in the figure below. Click [HWHP] to access the window for setting the weekly schedule for HWHP
(CAHV) units. Click [Air Conditioners] to access the window for setting the weekly schedule for air conditioning
unit, ventilator (LOSSNAY), Air To Water (PWFY) unit, and general equipment groups.
(1)Select the target for the schedule being set
(1-1)Select a particular group
If you wish to set a schedule for a particular group, select [Group] from
the Setting Range box.
Once the group is selected, the contents of the schedule saved for
that group wil be displayed in the Contents of Schedule box.
Note: If Expansion Controllers are connected, Expansion Controller system
selection buttons will appear. Select the button that corresponds to the
desired system (EC1, EC2, or EC3), and then select the groups in the
system.
In the Group Name field, all groups in all Expansion Controller systems
are available for selection. (If no name is assigned to a given group, it
will appear in the [Expansion Controller number + Group number]
format (e.g., Group 1-35)).
33
[Air Conditioners] and
[HWHP] buttons